Anping Blue Star Metal Wire Mesh Products Co., Ltd
Anping Blue Star Metal Wire Mesh Products Co., Ltd Quality first,customer first,integrity management,the pursuit of excellence!
Add to Cart
High Tensile 65Mn 45# crimped wire mesh with square Hole,rust-prevention with spray paint or oil painting
1.GENERAL INTRODUCTION
| Material | Mild steel/low carbon steel/ High Carbon Steel,/Stainless steel Wire |
| Wire diameter | 0.5-22mm |
| Aperture / Opening | 2mm - 100mm |
| Width | 0.5-4m(ususaly within 2m) |
| Length | 1-30m or as your requestd |
| Technique | weaving after crimping(pre-crimped) |
| Weaving method | Plain Crimp/Intermediate Crimp/ Lock Crimp/Flat Top Crimp/Slotted Hole |
| Mesh type | Square, rectangular and long slot |
| Surface treatment | anti-rust oil or anti-rust painting |
| Edge | Plain, bent, welded shroud, bolt shroud |
2.FEATURES
* wearable
* high temperature-proof.
* Good toughness, shake-proof and draw-proof
* keep-distance, better rate filter than sheet iron screen.
3.MAIN MATERIAL Chemical Composition
| No. | Steel Grade | Chemical Composition | ||
| C | Si | Mn | ||
| 1 | 45 | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 |
| 2 | 50 | 0.47-0.55 | ||
| 3 | 55 | 0.52-0.60 | ||
| 4 | 60 | 0.57-0.65 | ||
| 5 | 65 | 0.62-0.70 | ||
| 6 | 70 | 0.67-0.75 | ||
| 7 | 65Mn | 0.62-0.70 | 0.90-1.20 | |
| 8 | 72A | 0.70-0.75 | 0.15-0.35 | 0.30-0.60 |
4.WEAVING TYPES &EDGE TYPES
5. SPECIFICATION
65Mn Crimped wire mesh, Square wire mesh, mining scree wire mesh Specification:
| NO. | Wire diameter (mm) | Aperture/ Hole size (mm) | Weight (kg/sqm) |
| 1 | 12 | 75 | - |
| 2 | 10 | 38 | - |
| 3 | 9 | 32 | 25 |
| 4 | 8 | 22 | - |
| 5 | 7 | 25 | 19.5 |
| 6 | 6 | 10 | - |
| 7 | 4 | 10 | 14.5 |
| 8 | 2.5 | 6 | 9.3 |
| 9 | 2.2 | 4 | 10 |
Common Specification for Different Material
| Number | Hole size | Wire Diameter | Hole size | Wire Diameter | Opening rate |
| (mm) | (mm) | (Inch) | (Inch) | (%) | |
| 1 | 101.66 | 12.7 | 4 | 0.5 | 79.01% |
| 2 | 88.9 | 12.7 | 3.5 | 0.5 | 76.56% |
| 3 | 76.2 | 12.7 | 3 | 0.5 | 73.47% |
| 4 | 63.5 | 12.7 | 2.5 | 0.5 | 69.44% |
| 5 | 63.5 | 9.19 | 2.5 | 0.362 | 76.31% |
| 6 | 57.15 | 9.19 | 2.25 | 0.362 | 74.21% |
| 7 | 50.8 | 12.7 | 2 | 0.5 | 64.00% |
| 8 | 50.8 | 11.1 | 2 | 0.437 | 67.35% |
| 9 | 50.8 | 9.19 | 2 | 0.362 | 71.71% |
| 10 | 50.8 | 7.92 | 2 | 0.312 | 74.84% |
| 11 | 44.45 | 9.19 | 1.75 | 0.362 | 68.67% |
| 12 | 44.45 | 7.92 | 1.75 | 0.312 | 72.04% |
| 13 | 41.28 | 9.19 | 1.625 | 0.362 | 66.89% |
| 14 | 41.28 | 7.92 | 1.625 | 0.312 | 70.39% |
| 15 | 38.1 | 9.19 | 1.5 | 0.362 | 64.91% |
| 16 | 38.1 | 7.92 | 1.5 | 0.312 | 68.54% |
| 17 | 38.1 | 7.19 | 1.5 | 0.283 | 70.77% |
| 18 | 31.75 | 9.19 | 1.25 | 0.362 | 60.14% |
| 19 | 31.75 | 7.92 | 1.25 | 0.312 | 64.06% |
| 20 | 31.75 | 7.19 | 1.25 | 0.283 | 66.49% |
| 21 | 31.75 | 6.17 | 1.25 | 0.243 | 70.11% |
| 22 | 31.75 | 5.72 | 1.25 | 0.225 | 71.80% |
| 23 | 28.58 | 7.92 | 1.125 | 0.312 | 61.31% |
| 24 | 28.58 | 7.19 | 1.125 | 0.283 | 63.84% |
| 25 | 28.58 | 6.17 | 1.125 | 0.243 | 67.64% |
| 26 | 28.58 | 5.72 | 1.125 | 0.225 | 69.42% |
| 27 | 25.4 | 7.92 | 1 | 0.312 | 58.11% |
| 28 | 25.4 | 7.19 | 1 | 0.283 | 60.75% |
| 29 | 25.4 | 6.17 | 1 | 0.243 | 64.73% |
| 30 | 25.4 | 5.72 | 1 | 0.225 | 66.62% |
| 31 | 25.4 | 5.26 | 1 | 0.207 | 68.63% |
6. RUST- PREVENTION
7.product inspection to ensure our goods are all qualified
8.APPLICATION SHOWN
9. LOADING SHOW